Paints from Hirshfield's

X-100 Natural Seal
Wood Finishes

X-100 Wood Cleaners, Strippers, Restorers

Deck Care Clinics

X-100 Natural Seal Pre Finish

X-100 Natural Seal® Pre Finish is designed as the first coat in a two coat system. X-100 Natural Seal® Pre Finish is for use on new and old lumber. X-100 Natural Seal® Pre Finish may also be used as a rejuvenator for faded finishes. X-100 Natural Seal® Pre Finish provides UV woods stabilizing properties protecting future finishes from cracking, chipping, peeling and fading. Apply X-100 Natural Seal® Pre Finish prior to applying X-100 Natural Seal® for sidewalls and X-100 Natural Seal® Deck Finish™ for decks.

COVERAGE: new, dense or unseasoned wood, 300 to 400 sq. ft. per gallon, depending on porosity of surface. Old, seasoned or weathered wood, 200 to 300 sq. ft. per gallon, depending on porosity of surface.

X-100 Natural Seal Wood Preservative

X-100 Natural Seal® Wood Preservative is available in ultra transparent stains with natural oxides. The ultra transparent technology enables the natural wood grain to show through allowing for a natural wood finish. For optimal color fastness and UV wood stabilization use X-100 Natural Seal® Pre Finish.

COVERAGE: Sidewalls- smooth or rough sawn lumber including logs, first coat, 100 sq. ft. per gallon, second coat 200 sq. ft. per gallon.
Roofs - 75 to 150 sq. ft. per gallon, depending on porosity of surface.

X-100 Natural Seal Deck Finish

X-100 Natural Seal® Deck Finish is recommended for new, dense and seasoned decking lumber. X-100 Natural Seal® Deck Finish is designed for pressure treated, cedar, redwood and other hardwood decks or horizontal surfaces. X-100 Natural Seal® Deck Finish can be used for maintaining faded decks.

X-100 Natural Seal® Deck Finish is available in ultra transparent stains with natural oxides. The ultra transparent technology enables the natural wood grain to show through allowing for a natural wood finish. For optimal color fastness and UV wood stabilization use X-100 Natural Seal® Pre Finish.

COVERAGE:new, dense or unseasoned wood, 300 to 400 sq. ft. per gallon, depending on porosity of surface. Old, seasoned or weathered wood, 200 to 300 sq. ft. per gallon, depending on porosity of surface.

BACK TO TOP